Showing posts with label TECH_LXG. Show all posts
Showing posts with label TECH_LXG. Show all posts

Sunday, 18 November 2012

TECH@LXG: The Dawn of the Micro-Commuter

Further evidence of the coming fragmentation of personal transportation arrived when Honda released details of the next iteration of its "Micro Commuter" prototype.

The new version is close to production-ready (without the extreme aerodynamics of the initial prototype) and concentrates the battery and functionality of the micro EV below the floor, enabling the vehicle's body to be easily changed to accommodate different functionality.
It seemed so obvious 100 years ago, with an excess of petroleum, unreliable metallurgy and no concerns about air pollution, to over-engineer our automobiles so they'd have low stress, reliability and longevity, and be able to carry very large amounts of everything. There was only one casualty – efficiency. The folly of those ways is now equally obvious, and Honda's Micro Commuter Concept is at the extreme far end of the spectrum to that over-engineering approach.

Billed as a short distance EV commuter, the 100-inch long Honda Micro Commuter is a full six inches shorter than the smart fortwo's 's 106-inch length, and 20 percent narrower at 49 inches compared to the smart's 61.4 inches.
The secret of the latest vehicle's energy frugality is it's extremely light weight. Whereas a smart fortwo ED (Electric Drive) has a weight of 870 kg, the Honda comes in at considerably less than half that weight (it's less than 400 kg but we don't know the exact figure), and is able to achieve similar performance to the the smart ED with a motor producing just 15kW, compared to the smart's 30kW.

The Micro Commuter is built specifically for a new era though – it is designed to take one person and one passenger (or two children passengers) a maximum of 60 miles at a maximum of 50 mph. Those figures are realistically well within the range most people use in their commuting, but it will take some time for people to become accustomed to having just enough, instead of three or four times the power, weight and range required.Honda developed the Micro Commuter within a new framework of micro mobility categories currently being proposed by the Japanese Ministry of Land, Infrastructure, Transport and Tourism as well as European L7 regulations. To be classified under the L7 category in Europe, an EV must weigh less than 400 kg and have an output of 15 kW or less – in meeting those targets, the Micro Commuter is suddenly a very realistic alternative to the traditional automobile in an environment which will certainly appreciate it.

Honda will begin real-world testing of the Micro Commuter in Japan next year to verify the potential of the vehicle in short-distance transportation roles for a variety of users – families, ferrying small children and senior citizens to their necessary activities, home delivery services, commuting and car sharing.

The Micro Commuter Concept was first seen at the 2011 Tokyo Motor Show this time last year, but the concept has developed significantly since then, with the adoption of the Variable Design Platform.

Saturday, 11 August 2012

TECH@LXG: The Mixtape Reloaded!

In the days before CD, MP3 or iTunes, when Sony's Walkman was just about the only mobile music player worth having, hip young music lovers engaged in the painstakingly intricate process of recording a 45-minute-per-side compilation of favorite tunes onto an audio cassette tape. I'm not ashamed to admit I remember those days well...

A kind of forefather to today's MP3 playlist, the mix tape was about creating a unique musical identity, an expression of personality that could be shared with those near and dear. Technology marches relentlessly on and tapes are now all-but extinct, replaced by digital files on smartphones and media players.

The essence of the compact cassette mix tape has now been given a modern update by the folks from the MakerBot Industries Applications team in Brooklyn, New York, with the launch of the 3D-printed Mixtape do-it-yourself music player kit.
The first in a new series of DIY Projects, the Mixtape is available in two distinct flavors - the choice depending on whether you own something like a MakerBot Replicator or not. A DIY kit containing the electronics (including a Li-ion battery that's good for four hours of playback between charges), a USB cable and instructions is available for US$25.

The design files needed for 3D printing are available for download from Thingiverse.com. Once the components have been created with a 3D printer, the Mixtape just snaps together with the electronic board housed inside. The 3.5mm headphone jack should be available at the bottom (where the pressure pad would be on a cassette) and three buttons positioned on the front of the Mixtape control play/pause, skip forward or backward, equalizer, volume and reset.
MP3 music files can be dragged and dropped onto the 2GB of built-in solid state storage from a Mac/PC via USB. For those not lucky enough to own a 3D printer, MakerBot has also made a ready-to-go Mixtape available for $39, which is printed, assembled and shipped from the Brooklyn workshop.

As you can see from the following promo video, creating and sharing a personalized collection of tunes with a loved one continues into the digital age with the MakerBot Mixtape.
Source: MakerBot